Genesis Advanced Technologies 2006 Manuel d'utilisateur télécharger pdf (Page 11)

when filled with water. Do not drop the bath on a hard

surface.

GENESIS 2006

: Remove all, or part of the water. The bath

weighs approximately thirty (30) pounds when filled with

water. Carefully remove the water bath from the device.

5.6 DO NOT USE BLEACH OR HARSH CLEANERS.

Depending on mineral content of water used, the bath may

discolor. Proper cleansing should keep this to a minimum.

Use LABath CLEAN

regularly to control bacteria, algae

and turbidity. To order additional LABath CLEAN

, call

GenesisBPS, LLC at 866-712-5663.

5.7 Fill the bath. The maximum water level should be

approximately two inches from the top of the water bath.

This level will ensure that the water level will be at the

slotted line on the unit when the bath is repositioned.

DON'T OVERFILL THE BATH. Add 2 ml of LABath

CLEAN

each time water is changed.

DON'T USE BLEACH OR HARSH CLEANERS as this may

scratch and discolor bath.

5.8 To replace bath: GENTLY place the bath onto the ROCKER

PIN, ensure the pin head is located in the slot of the bath.

Ensure that the center of bath is positioned onto the white

roller on the base plate. Hold the handle firmly on the front of

the control panel. Release the clamp knob by turning it

counterclockwise. Lower the unit slowly into the water.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Pas de commentaire

Genesis Advanced Technologies 2006 Manuel d'utilisateur Page 11